Your first barbell and plates: buy a compatible setup
Buying your first barbell sounds straightforward until you realize the bar, plates and collars have to fit together. Let's price a setup you can actually use.
We may earn a commission from qualifying purchases through these links. As an Amazon Associate I earn from qualifying purchases. Amazon prices are shown on Amazon; dated prices from other retailers are not Amazon quotes. How our links work. Prices, stock, and terms can change.
Sources last checked October 27, 2026.

Jump to a section
Start with the empty bar
Before you price a pile of plates, check the weight of the empty bar. The REP Delta weighs 20 kg, about 44.1 lb. Could you comfortably use that weight for your planned exercises? If not, start with a lighter training bar or dumbbells. Plates only make the bar heavier, so this is the cheapest mistake to catch before checkout.
The Delta has a 29 mm grip shaft and 50 mm sleeves. Those are different measurements: your hands hold the shaft, while plates and collars fit the sleeves. Check the sleeve specification when matching parts.
Sources: 1
Match plate holes, collars, and rack fit before adding weight
First, match plate holes to the bar sleeves. REP lists a 52 mm center hole on its Old School Iron Plates for Olympic bars. Second, choose collars intended for the same sleeve system; Rogue lists its HG 2.0 pair for standard 2-inch Olympic bars. Third, verify that the bar fits the rack and leaves usable loading room at both ends.
A listing that says “standard” can be ambiguous. Read the actual dimensions rather than assuming every weight plate fits every bar. Existing plates are only a saving if they fit the new bar and are appropriate for the intended use.
Count the pair total correctly
One 45 lb pair adds 90 lb to a bar, not 45 lb. Our example cart uses one pair each of 2.5, 5, 10, 25 and 45 lb. Together that is 175 lb of plates, making approximately 219.1 lb with the Delta bar, before collars.
That is a starting example, not a universal training prescription. An experienced lifter may need more total load; a beginner may need much less. Write down the smallest and largest loads you expect to use, then check whether the plate combinations can make the intermediate steps.
Price the complete cart, not just the plates
On October 27, 2026, the Delta was listed at $199.99. The five individual iron-plate pairs totaled $378.45: $22.50, $35.99, $49.99, $99.99 and $169.98. A pair of Rogue HG 2.0 collars was $50. Together, the bar, plates and collars totaled $628.44 before tax and shipping.
Adding the $379.99 PR-1100 rack brings this example to $1,008.43. A bench, flooring and any installation or delivery charges remain outside that figure. This is our addition of listed items, not a retailer bundle offer or a promise of the checkout total.
If you already own a compatible component, remove only that component from the budget. Do not count an incompatible old bar or an undersized plate set as completing the system.
The October 27, 2026 component-cost example
On a small screen, swipe the table sideways.
| Component | Configuration to verify | Example price before tax and shipping |
|---|---|---|
| REP Delta bar | 20 kg bar; 50 mm sleeves | $199.99 before extras |
| 175 lb iron plate cart | Five pairs, not five individual plates | $378.45 calculated; not for dropping |
| Rogue HG 2.0 pair | Standard Olympic sleeve fit | $50; choose one-pair listing |
| PR-1100 rack | Includes safeties and J-cups | $379.99; space still needs checking |
Iron plates are not a drop-friendly shortcut
REP advises against dropping its iron plates, and also advises against mixing them with bumpers because uneven diameters can stress the bar. This example is for controlled lifting, not a setup for repeatedly dropping loaded bars.
If your intended training includes Olympic-style lifts or dropping from height, stop and choose equipment and a platform specifically suited to that use. A rubber floor covering does not automatically make the equipment or building suitable.
Sources: 2
Order a usable system
Your final cart should include every component your lifts require, especially approved safeties if you'll train in a rack. If that pushes you over budget, wait on the purchase or change the plan. A cheap bar by itself doesn't give you a usable setup. Add a bench only if your exercises call for one.
Still deciding whether you want barbell training? Use your existing weights first. You can make that decision before committing to a rack-sized footprint.
Equipment in this guide
Compare the exact model, included accessories, delivery, and return terms on the seller’s page.
We may earn a commission from qualifying purchases through these links. As an Amazon Associate I earn from qualifying purchases. Amazon prices are shown on Amazon; dated prices from other retailers are not Amazon quotes. How our links work. Prices, stock, and terms can change.
REP Delta Basic Bar, bright chrome
Choose it for: 20 kg (44.1 lb); 86.6 inches long; 29 mm shaft; 50 mm Olympic sleeves; center knurl.
Check before ordering: Empty bar may already be too heavy for some movements. Check rack fit and loading room; this is a basic mixed-use bar, not a specialist weightlifting recommendation.
View on AmazonOpens AmazonREP Old School Iron Plates, 175 lb in five pairs
Choose it for: One pair each of 2.5, 5, 10, 25 and 45 lb plates; 52 mm center holes for Olympic sleeves.
Check before ordering: Order all five pairs. This is our calculated cart, not a discounted bundle quote. Iron plates should not be dropped; maximum loaded bar is about 219.1 lb with the 20 kg Delta.
Check price & availabilityOpens repfitness.comRogue HG 2.0 Collars, one pair
Choose it for: One pair of clamp collars for standard 2-inch Olympic bar sleeves.
Check before ordering: Select one pair, not a multi-pair package or an axle-bar variant. Check secure engagement before use.
Check price & availabilityOpens roguefitness.comREP PR-1100 Power Rack, metallic black
Choose it for: Pin-pipe safeties and J-cups included; 85 inches tall; 58.1 inches wide and 48.5 inches deep.
Check before ordering: Verify ceiling, assembly and exercise clearances. Listed 700 lb rackable capacity is not a universal safe-use assessment. Not for kipping or muscle-ups.
View on AmazonOpens AmazonA few more questions
Can I mix one-inch plates with this Olympic bar?
No. The example bar uses 50 mm sleeves, so the plate-hole specification must match the Olympic system.
Sources & research notes
Sources checked October 27, 2026. We checked the component arithmetic against the dated cart and rechecked REP’s Delta sleeve and shaft specifications on November 4, 2026. This is a compatibility and cost-planning guide, not a lifting test. The October 27 prices have not been refreshed.


