FitRestFuelSearch articles
FIT / BUYING COMPARISON

REP PR-1100 lat pulldown: plate-loaded or selectorized?

The cheaper attachment can make perfect sense. Just don't buy it expecting to add REP's weight stack later.

Sources last checked November 6, 2026.

Jump to a section

Don't count on upgrading the cheaper one later

The plate-loaded attachment looks like a great way to save money on your PR-1100. Just don't buy it thinking you can add REP's weight stack later. Its plate-loaded-to-selectorized conversion kit is for the 4000 and 5000 Series, not the PR-1100 or other 1000-Series racks. Switching to selectorized later means replacing the attachment.

That's not a reason to avoid plate-loaded. It's a reason to buy it because you genuinely like using plates. If you're already sure you want a pin-adjusted stack, saving for it once is likely cheaper than buying twice.

Sources: 3, 1, 2

REP 1000-Series lat pulldown comparison

On a small screen, swipe the table sideways.

What mattersPlate-loadedSelectorized
Attachment price, Nov. 6, 2026$264.99$1,049.99
WeightsUse your Olympic plates200 lb included stack; optional 50 lb add-on
Changing resistanceMove platesMove a selector pin; 10 lb steps from 20 lb
Pulley ratio1:11:1
Added rack depth17 in, plus 10 in suggested loading clearance23.6 in; allow operating clearance too
Convert plate-loaded to stack later?No REP 1000-Series conversion kitAlready has a stack

The $785 difference is not an upgrade price

REP listed the plate-loaded attachment for $264.99 and the selectorized version for $1,049.99 when we checked US prices on November 6, 2026. That's a $785 difference for someone buying one attachment today. Neither price includes the rack. REP advertises shipping to the contiguous 48 states, but check your cart for taxes, promotions and any assembly costs.

Already own plate-loaded? Keeping it costs you nothing more. Replacing it costs the full selectorized purchase price, minus whatever you actually get by selling the old one. The $785 gap between two new listings isn't what REP charges to convert your existing unit.

Buy plate-loaded now and selectorized later at these checked prices, and you've spent $1,314.98 before tax and resale. Compare that with buying the selectorized attachment once for $1,049.99. And don't automatically budget for new plates if your current ones will do.

Sources: 1, 2, 5

Think about your workout, not just the weight stack

If you do three sets of pulldowns at one weight, swapping a couple of plates may be no big deal. If you switch between pulldowns and rows, do drop sets or share the station with someone using much less weight, changing a pin can save plenty of fuss. That's the convenience you're paying for. We haven't tested the pulley feel or timed weight changes on either attachment.

REP lists both as 1:1 pulley systems. That describes the pulley ratio, not a guarantee that the handle resistance feels identical to your plate or stack selection. The selectorized stack starts at 20 lb and increases in 10 lb steps. For lighter exercises, check whether those jumps give you enough control.

The selectorized version comes with 200 lb of stack weight. REP lists a separate 50 lb add-on for $162.49, bringing its stack to 250 lb. That's an upgrade for owners of the selectorized unit, not a conversion for plate-loaded owners.

The plate-loaded version gives you flexibility with plates you own, but only if they fit. REP lists 8.25 inches of loading space on each side and compatibility with Olympic iron and bumper plates. Thick bumpers eat that length quickly. Measure the combination you intend to use, especially if heavy rows are the goal.

Sources: 1, 2, 4

Measure where you'll stand and load plates

The plate-loaded version adds 17 inches behind the rack, and REP recommends another 10 inches behind the attachment so you can get plates onto it. The selectorized model adds 23.6 inches to rack depth. Those numbers describe different parts of the setup; 17 inches alone doesn't mean plate-loaded needs less usable room.

Put tape on the floor for the added footprint. Then check how you'll reach the plate horns, where your bench goes for low rows, and whether you can move around the rack without turning each set into an obstacle course. Check assembled height and overhead clearance too.

Sources: 1, 2

One bench-spotting catch could settle it

Both attachments are designed for REP's PR-1000 and PR-1100, not the shorter PR-1050. REP also says the selectorized version's footplate leaves too little room for a bench spotter inside the cage. Its FAQ suggests spotting outside the rack instead.

If someone regularly spots your bench inside your PR-1100, don't treat that as a minor detail. Ask REP about your exact rack, bench position and safeties before changing the arrangement. Moving a lift outside the rack needs its own safety plan. Our rack comparison explains the fit restriction further.

Sources: 2

What we'd actually buy

Already have suitable plates and space to load them? Plate-loaded is the better value for a straightforward cable routine. You don't need a weight stack just to do a few sets of pulldowns.

Selectorized makes more sense if changing weights repeatedly gets in the way, the 20 lb starting point and 10 lb jumps suit your exercises, and the room and bench-spotting restrictions check out. If your existing plate-loaded attachment works well, keep it until you can name the problem that a stack would solve.

Compare the two REP attachments

Compare the exact model, included accessories, delivery, and return terms on the seller’s page.

These seller links are not currently affiliate links. How our links work. Prices, stock, and terms can change.

REP 1000-Series plate-loaded lat pulldown / low row

Choose it for: You own suitable plates, have rear loading clearance and don't mind changing them.

Check before ordering: No REP 1000-Series conversion to selectorized; verify loaded plate thickness and room.

Check price & availabilityOpens repfitness.com

REP 1000-Series selectorized lat pulldown / low row

Choose it for: Fast weight changes matter and the stack increments suit your routine.

Check before ordering: Costs $785 more at the checked prices; check bench-spotter clearance and room.

Check price & availabilityOpens repfitness.com

Sources & research notes

Sources checked November 6, 2026.

  1. REP 1000-Series plate-loaded lat pulldown: price, ratio, loading area and dimensions (opens in new tab)
  2. REP 1000-Series selectorized lat pulldown: price, stack, dimensions and compatibility FAQs (opens in new tab)
  3. REP 4000/5000 conversion kit: supported product families (opens in new tab)
  4. REP 1000-Series selectorized 50 lb weight-stack upgrade (opens in new tab)
  5. REP shipping policy (opens in new tab)
Back to top ↑