FitRestFuelSearch articles
FIT / PRACTICAL BUYING AND STORAGE-COMPATIBILITY GUIDE

Can You Store a Rowing Machine Upright? Model-by-Model Guide

Check the exact storage method before choosing a rower for a shared room.

Sources last checked November 17, 2026.

Yes, some rowing machines can be stored upright. But there is a catch: standing a machine on end, folding its rail, and separating it into two pieces are three different things. A WaterRower Original is designed to stand upright as one piece. A Concept2 RowErg is meant to be separated for compact storage. A Hydrow needs the correct storage accessory. And the Concept2 Dynamic cannot be stored on end at all.

If you're choosing a rower for a room that has to serve another purpose after your workout, those differences matter more than a product description that simply says space-saving.

Jump to a section

Which rowing machines can be stored upright?

On a small screen, swipe the table sideways.

Rowing machineApproved storage methodSeparate wall accessory?Published stored sizeImportant restriction
Concept2 RowErg, standard legsSeparate into two piecesNo dedicated wall kit specified25 × 33 × 54 inDo not stand the fully assembled machine on end
Concept2 RowErg, tall legsSeparate into two piecesNo dedicated wall kit specified27 × 47 × 54 inRequires more storage room than standard legs
Concept2 Dynamic RowErgRemain fully assembled, horizontallyNot applicable76 × 24.3 in floor footprintCannot be stored on end
WaterRower OriginalStand the assembled rower uprightNo separate mounting kit specified for the manufacturer's standard procedureAbout 82 in tall; see conflicting dimensions belowPosition the seat correctly; avoid bumps and pulling the handle
Hydrow Arc / OriginStore vertically using the Upright Storage KitYes33 × 25 × 86 inKit must be installed correctly; not compatible with Wave
Hydrow WaveStore vertically using its Vertical AnchorYes26.5 × 30 × 82 inRequires the Wave-specific anchor
Echelon Row-s, current listingFold into its designated upright-storage configurationConfirm for exact revisionNot independently settledDo not stand the unfolded machine on end or rely on inconsistent folded dimensions

Dimensions are inches, reproduced from manufacturer publications. The manufacturer's published order is retained where axis labels are unclear. For a tight storage location, confirm the exact dimensions of the model you are buying.

The surprising entry is the regular Concept2 RowErg. You've probably seen one standing vertically in a gym. That doesn't make it the manufacturer's recommended storage method.

The Concept2 RowErg: Separate it, don't stand it up assembled

Concept2 is unusually direct about this.

In its official moving and storage guidance, the company advises against storing the RowErg vertically with the front section and monorail still attached.

There are two reasons. The assembled machine can tip over, and bringing it back down from that position can place damaging stress on the frame.

That doesn't mean the RowErg needs to occupy eight feet of floor space between workouts.

Its framelock lets you disconnect the monorail from the flywheel section without tools. You then store the two sections in their compact arrangement.

Concept2 publishes these dimensions:

  • Standard legs: 25 × 33 × 54 inches.
  • Tall legs: 27 × 47 × 54 inches.

Notice the difference. The tall-leg RowErg has a higher seat, but it also needs substantially more room in the manufacturer's separated-storage configuration.

If you're comparing those two versions, our Concept2 standard-versus-tall guide explains the other purchasing differences.

One important precaution when putting the machine back together: Concept2 says the framelock must be securely engaged before moving or using the assembled RowErg. Follow the manufacturer's instructions rather than improvising a quicker connection.

What if you've already been storing one vertically?

Seeing somebody else do it does not establish that it is approved.

You don't need to assume your machine has been damaged. But if you're deciding how to store it going forward, Concept2's recommendation is clear: separate the two sections instead of balancing the assembled machine on end.

The Concept2 Dynamic doesn't have the same storage option

The Dynamic RowErg is a different design, not simply another version of the regular RowErg.

Concept2 specifies that the Dynamic:

  • Must remain fully assembled in storage.
  • Cannot be stored on end.
  • Occupies approximately 76 × 24.3 inches of floor space when stored.

That last number is worth thinking about. The Dynamic is shorter than the regular RowErg when assembled, but you cannot reclaim its length by taking it apart after every session.

If your workout room also functions as a guest bedroom, home office, or living room, that could rule it out before you compare rowing feel.

Concept2 primarily positions the Dynamic for people training for on-water rowing. Its shorter assembled footprint should not be mistaken for a vertical-storage feature.

Source: Concept2 Dynamic RowErg specifications

WaterRower Original: Yes, the water can stay in the tank

The WaterRower Original is designed around a different approach.

Its tank stays at the bottom as the machine is raised into an upright position. According to WaterRower's current Original product page, you do not need to drain the tank for ordinary upright storage.

The company's Original-specific owner's manual gives an important first step: slide the seat forward toward the footboard before raising the machine.

The manual then describes lifting from the rear spacer and bringing the rower upright using the manufacturer's intended movement.

This sounds simpler than disconnecting a machine after every workout. It is, in the sense that you don't have two pieces to reassemble.

But consider the weight.

The current product page lists the Original at approximately 100.5 pounds when filled to 17 liters. You're pivoting the machine rather than lifting that entire weight straight into the air, but repeatedly raising a large piece of equipment may still be inconvenient for some households.

Can an upright WaterRower tip over?

Yes. Designed for upright storage does not mean impossible to knock over.

WaterRower's Original Series Walnut handling and storage documentation gives specific precautions:

  • Return the handle to its holder after use.
  • Do not pull the handle while the rower is upright.
  • Avoid bumping the stored machine.
  • Take particular care around children.

Those warnings matter in a shared room where someone might grab the handle, brush against the rail, or play near the machine.

WaterRower describes its intended upright position as stable. That is not permission to disregard the handling warnings.

Why are the WaterRower Original's stored dimensions confusing?

The current manufacturer's product page lists these upright dimensions:

17.25 inches deep × 22.25 inches wide × 81.5 inches high.

On that same page, WaterRower gives metric dimensions of:

51 cm deep × 57 cm wide × 209 cm high.

Those measurements do not convert consistently. For example, 51 cm is approximately 20.1 inches, not 17.25 inches. And 209 cm is approximately 82.3 inches, not 81.5 inches.

This is a discrepancy within the manufacturer's published specifications, not something we can confidently explain as a particular design change.

For ordinary planning, you can tell the Original stands about 82 inches high. If your available space is unusually tight, don't rely on the conflicting measurements without confirming the exact machine and accessories you're purchasing.

Hydrow: The anchor is part of the storage plan

Hydrow's Arc, Origin, and Wave all support vertical storage, but not simply by leaning the machine against a wall.

They need dedicated storage accessories.

Hydrow Arc and Origin

Hydrow specifies its Arc & Origin Upright Storage Kit for these two models.

With the kit installed, both have published stored dimensions of:

33 × 25 × 86 inches.

The kit is designed for installation into suitable wall construction, with manufacturer-supplied parts for wood studs or masonry.

Hydrow lists the kit separately from the rower. If you're comparing an Arc or Origin with a machine that stands upright without a wall mount, account for the accessory and installation before treating the two storage arrangements as equally convenient.

The manufacturer explicitly warns against storing these machines upright without the correct kit.

Hydrow Wave

The Wave does not use the Arc/Origin kit.

It requires the separate Hydrow Wave Vertical Anchor, which includes a wall mount and a stand.

Hydrow publishes stored dimensions of:

26.5 × 30 × 82 inches.

That is shorter than the Arc and Origin in their upright positions, but the Wave still needs its own mounting arrangement.

The two Hydrow accessories are not interchangeable. Buying a used Wave without its anchor does not mean you can borrow an Arc storage kit or simply balance the machine vertically.

What if you can't install a wall mount?

This is a question to resolve before buying a Hydrow for vertical storage.

If you're renting, cannot drill into the intended wall, or do not have a mounting surface that satisfies Hydrow's installation instructions, the manufacturer's upright-storage method may not be available to you.

Don't substitute an ordinary wall lean for the specified kit.

Source: Hydrow's model-by-model storage dimensions

Echelon Row-s: Folding upright is not the same as standing on end

The current Echelon Row-s listing advertises a foldable design that stores upright.

That is a different mechanism from tilting an unfolded rower onto its end. Use the folding and locking procedure specified for your exact Row-s version.

One published detail needs clarification, though.

The current manufacturer's listing gives a folded configuration of 48 × 24 × 69 inches, but it labels the final measurement as a second length instead of height. Older Row-s listings have also used different folded measurements.

Echelon's publicly linked support manual predates the current product description, and it does not resolve that generation-specific discrepancy.

We would not treat the folded measurement as fully confirmed for a particular purchase until Echelon supplies matching documentation.

If that measurement determines whether the machine will fit your storage location, ask Echelon to confirm the folded length, width, height, and locking procedure for the exact model or SKU you're ordering.

The larger lesson: a manufacturer's promise that a rower folds does not automatically settle how much room it occupies once folded.

Do you need a wall anchor to store a rowing machine upright?

Not always.

WaterRower describes an upright-storage procedure for the Original without a dedicated wall-mount kit. Concept2's normal RowErg becomes compact by separating into two pieces.

Hydrow is different. Its Arc, Origin, and Wave have model-specific storage hardware that must be installed correctly.

For the Echelon Row-s, follow the folding and locking instructions for the exact revision rather than inferring its requirements from other machines.

There is no universal anchoring rule based on whether a rower uses water, air, or magnetic resistance. The storage design is what matters.

Before you buy, think about the end of the workout

Picture the first evening you're finished rowing and want your floor back.

If the machine is a regular Concept2 RowErg, you'll separate the sections and put them away.

If it's a WaterRower Original, you'll move the seat forward and raise the machine using its approved procedure, remembering that the filled rower is substantial equipment and can be knocked over.

With a Hydrow, you'll use the model's installed storage accessory. Without that installation, you do not have the manufacturer-approved vertical-storage arrangement.

With an Echelon Row-s, you'll use the folding mechanism, after confirming how your particular version locks and how much space it occupies.

And with a Concept2 Dynamic, you'll leave the machine assembled horizontally.

Before ordering, settle four questions:

  1. Which exact storage method does the manufacturer approve? Don't rely on somebody's gym photo or a generic retailer description.
  2. Can you comfortably repeat that method after every workout? Separating, folding, and lifting ask different things of you.
  3. Does it require an additional accessory or permanent installation? This is particularly important for Hydrow.
  4. Are your stored dimensions and handling instructions confirmed for the exact model? Especially important when listings disagree or accessories alter the configuration.

A compact machine is only convenient when its storage routine works for the people using it.

If you want a machine that stands upright without separating it, the WaterRower Original has a manufacturer-documented procedure, along with important handling precautions. If you're set on a regular Concept2 RowErg, plan to separate it. Don't treat the assembled vertical position as the approved shortcut.

And if you're shopping for a Hydrow or a folding Echelon, confirm the accessory or mechanism before you decide you've solved the storage problem.

Sources & research notes

Sources checked November 17, 2026.

  1. Official RowErg product specifications (opens in new tab)
  2. Concept2 moving and storage guidance (opens in new tab)
  3. Official Dynamic specifications (opens in new tab)
  4. Current Original product page (opens in new tab)
  5. Original-specific owner's manual (opens in new tab)
  6. Original Series Walnut safety document (opens in new tab)
  7. Arc & Origin Upright Storage Kit (opens in new tab)
  8. Hydrow Wave Vertical Anchor (opens in new tab)
  9. Hydrow storage dimensions (opens in new tab)
  10. Current Echelon Row-s listing (opens in new tab)
  11. Echelon Row-s support page (opens in new tab)
  12. Support-linked manual (opens in new tab)
Back to top ↑