REP Ares 2.0 vs. Dual Athena: Which Rack Upgrade Should You Buy?
Both turn a REP rack into a cable-training station. The real choice is whether you'll use Ares's pulldown and row setup enough to justify its added cost and complexity.
Sources last checked November 4, 2026.
Jump to a section
Start with the exercises you need
If you already own a REP rack, you're probably trying to add cable exercises without finding room for another machine. Both systems can help. Here's the important distinction: we're comparing Ares 2.0 with the dual-sided, weight-stack Athena. REP's single-sided and plate-loaded Athena options are different purchases.
Ares adds built-in lat pulldowns and rows. Athena puts adjustable cable stations along the sides of your rack. You'll also find differences in resistance, cable travel and installation.
Settle rack compatibility before anything goes in your cart. Even when a return is permitted, sending back a large, heavy attachment can involve shipping deductions, repacking and other conditions. It's much easier to verify the fit before ordering.
What you're getting
On a small screen, swipe the table sideways.
| Feature | REP Ares 2.0 | Dual Selectorized Athena |
|---|---|---|
| Basic design | Integrated functional trainer, lat pulldown, and row system | Two side-mounted adjustable cable stations |
| Standalone machine? | No | No |
| Pulley ratio | 2:1 | 2:1 |
| Standard selectorized stacks | Two 260-lb stacks | Two 170-lb stacks |
| Available stack upgrades | Two 310-lb stacks | Two 220-lb stacks |
| Approximate resistance per upgraded side at 2:1 | 155 lb | 110 lb |
| Integrated lat pulldown and row system | Yes | No |
| Separate lat/low row attachment possible? | Already integrated | Yes, subject to configuration and additional components |
| Fits every REP power rack? | No | No |
| Returns | Confirm eligibility and conditions for the exact configured order with REP; a general money-back message does not establish every component's eligibility. | U.S. selectorized Athena product page advertises 30-day money back; written return conditions and exclusions apply. |
Manufacturer specifications, not our measurements. Approximate handle resistance is calculated using the stated 2:1 ratio. Neither price nor compatibility is established merely by the rack series name.
Comparison sources: 1, 2, 7, 8
First, check your rack. This can decide the purchase for you.
Write down the rack details REP needs to confirm the exact installation:
- REP rack series and generation.
- Four-post or six-post configuration.
- Upright height.
- Crossmember lengths.
- Whether the required crossmembers have vertical mounting holes.
- Existing rear stabilizers, foot extensions, storage, and attachments.
Ares 2.0 compatibility
REP identifies these supported arrangements:
- PR-4000 six-post: 16-, 24-, 30- or 41-inch front crossmembers with 16-inch rear crossmembers.
- PR-4000 four-post: 16-inch crossmembers, as listed in the current builder FAQ.
- PR-5000 six-post: 16-, 30- or 41-inch front crossmembers with 16-inch rear crossmembers.
- PR-5000 four-post: 16-inch crossmembers.
For PR-4000 installations, the relevant 16-inch crossmembers need the required vertical holes.
Older PR-5000 owners need to check their upright hole pattern. REP distinguishes the current rack from an older generation with alternating hole sizes.
REP also excludes certain flat-footed rack configurations, including the Omni, Apollo, and original HR-5000.
REP's own Ares pages aren't completely consistent: the builder FAQ includes the four-post PR-4000, but another overview leaves it out. If that's your rack, send REP your configuration and ask them to confirm the required parts in writing.
The current PR-5000 uses 1-inch holes along the upright. The older version alternates 5/8-inch and 1-inch holes and is not a supported substitute.
Athena compatibility
Athena supports the PR-4000 six-post rack and supported PR-5000 configurations, but explicitly excludes the four-post PR-4000, older PR-5000 generations and certain flat-footed racks. The PR-4000 needs updated crossmembers with vertical holes. Do not assume an Athena fits because an Ares configuration may fit.
Also confirm your rack height. REP says the 80-inch and 93-inch Athena attachments must match the corresponding rack height.
Send REP your rack's exact configuration and photos of the mounting points if needed. Ask whether the attachment you've selected will fit, including any stabilizers or crossmembers you'll need to add.
Sources: 2
Do you need integrated pulldowns and rows?
Dual Athena supplies two adjustable pulley stations for cable flyes, lateral raises, curls, triceps extensions and single-arm movements. If those are the exercises you are missing, it may be enough.
Ares 2.0 integrates a lat pulldown and seated row arrangement into the same system. The Ares 2.0 also uses independent weight stacks, allowing different resistance settings on its two sides.
Ares combines functional-trainer and lat-pulldown functions with the rack. Its updated seated-row arrangement allows different seating positions; REP describes improvements to its footplate and space inside the rack. Their value depends on the exercises you actually perform.
If you already have a compatible lat pulldown and low row attachment that works for you, Athena may fill the missing adjustable-cable role. Ares replaces REP's existing plate-loaded or selectorized lat/low-row attachments; do not count those as components you can automatically reuse.
REP says the Athena can be combined with a separate lat pulldown and low row attachment when the required Rear Base Stabilizer 2.0 and compatible rack arrangement are used.
For a supported four-post Athena arrangement, REP says the Rear Base Stabilizer 2.0 and lat/low-row attachment must mount to the rear uprights.
Price and verify that whole combination with REP before buying the parts separately.
Those extra parts can change the cost quite a bit.
Check the included handles, not just the photographs
REP's current builder describes different Ares packages. The 4000 Series lists knurled D-handles, a hard-chrome lat bar and low-row bar, a connector banana, and two integrated 5 lb add-on weights, approximately 2.5 lb at each handle. The 5000 Series lists a knurled lat bar, REP × Kleva Atlas close-grip attachment, two knurled D-handles, two 2-in-1 bar connectors and four carabiners.
The separate six-post Ares page still describes four D-handles, whereas the builder lists two for the 5000 Series. Confirm the itemized contents of your order rather than assuming every page describes the same accessory bundle. Leg rollers and extra cable attachments are separate purchase decisions; REP recommends one 4000-Series or two 5000-Series leg rollers for pulldown support.
Athena lists one urethane D-handle per unit, so a dual setup supplies two. Its selectorized version also lists weight-storage spacers; REP says these are needed to clear standard 17.7-inch plates. That does not make a separate lat attachment or its required stabilizer part of the standard dual Athena package.
Compare resistance at the handle
Both systems use a 2:1 pulley ratio.
In simple terms, a 100-pound selected stack load provides approximately 50 pounds of resistance at the handle. Actual feel can vary with friction and the cable path.
Ares 2.0 resistance:
- Two 260-pound selectorized stacks as standard.
- Optional upgrades to 310 pounds per stack.
- Approximately 130 pounds of resistance per side with the standard stack at 2:1.
- Approximately 155 pounds per side with the upgraded stack at 2:1.
Selectorized Athena resistance:
- A 170-pound stack on each selected side.
- Optional upgrades to 220 pounds.
- Approximately 85 pounds of resistance per side as standard.
- Approximately 110 pounds per side with the upgrade.
For isolation movements, compare your own working loads with the available handle resistance rather than assuming the larger stacks are necessary.
For heavier cable pulling movements, the Ares' additional available resistance and integrated stations may matter more.
Also remember that using a connecting bar or separate cable arrangement can change how resistance is applied. Don't assume every exercise produces the same resistance just because the stacks have the same numbers.
The Athena has one advantage worth noticing: cable travel
Here's an advantage Athena has that you might not expect: the cable can travel farther.
REP publishes these cable-travel measurements:
On a small screen, swipe the table sideways.
| Rack height | Ares 2.0 | Athena |
|---|---|---|
| 80-inch configuration | 71.3 inches | 82.8 inches |
| 93-inch configuration | 94.9 inches | 106 inches |
That extra travel may help taller users or exercises that need a longer pull. Ask REP about the usable range for your rack height and the movements you plan to do; the chart alone can't show the full motion.
Measure the installed system and exercise space
Both attachments integrate with a rack, but the final footprint depends on your configuration.
The Ares 2.0 places its weight stacks and cable routing within the rack arrangement.
The selectorized Athena mounts weight stacks along the rack sides. REP lists additional width requirements that vary by rack series.
The plate-loaded Athena is different again because its weight horns need side clearance. Loaded plates can interfere with existing storage.
If your gym is narrow, that distinction may matter more than the difference between the advertised prices.
- Ceiling height: Include the finished equipment height and the clearance needed for safe installation and operation.
- Total width: Account for weight stacks, plate storage, existing attachments, and room to perform cable exercises.
- Total depth: Include the installed rack, foot extensions or stabilizers where required, and the space needed for bench work or rows.
- Access: Make sure you can move around the rack, load equipment, and reach service areas without moving other heavy equipment.
For reference, REP lists total Ares 2.0 heights of approximately 82.1 inches for the 80-inch configuration and 93.9 inches for the 93-inch configuration.
Athena lists 1.8 inches of additional height above the rack.
You'll still need the installation and workout clearance REP specifies for your build.
If you're working with a low ceiling or an unusually tight room, get REP's approval for your exact configuration before ordering.
We found conflicting dimensions on REP's own pages. Athena's FAQ says it adds 7.9 inches at the front; its technical table says 6.0. The Ares builder lists 6 inches of added depth, while a separate six-post page says 0.6. That page also refers to a 90-inch added-height setup even though the tall rack offered is 93 inches. For a tight room, ask REP for the finished size and needed workout clearance rather than gambling on the smallest figure.
Don't overlook rack stability
REP states that a four-post Ares configuration must either be bolted down or use the required Mini Front Foot Extensions at both the front and back.
For six-post Ares, REP's FAQ says bolting is not required but recommends it for safety. The overview abbreviates the four-post rule to front and rear foot extensions, while its FAQ allows bolting down instead. Use the exact installation instructions; neither wording permits omitting both.
If you're renting, can't drill into the floor, or aren't sure what support system your rack needs, settle that before choosing the attachment.
Athena has its own rack and stabilizer requirements. Do not assume the systems share identical stability rules.
What does each complete setup cost?
On November 4, 2026, REP's U.S. website advertised:
- Ares 2.0 builder starting at $2,999.99.
- Athena side-mount builder starting at $949.99.
The Athena's starting configuration is not a complete dual-sided selectorized installation with every possible accessory.
For a more specific example, the Athena builder showed $1,799.99 for the selectorized 5000 Series, 80-inch Dual, 30-inch + 16-inch six-post attachment with standard stacks. After deselecting the automatically added safeties and J-cups, the order summary contained only that attachment and showed Add to Cart without a stock warning on that line. This assumes you already own the compatible, properly equipped rack. It excludes a separate lat/low-row system, assembly, tax and any installation extras.
The initial builder total included optional rack accessories, including out-of-stock flip-down safeties. Review every line, even when upgrading an existing rack. We could not verify a matching Ares configured subtotal because its configurator stalled. The $2,999.99 starting price is therefore not a complete installed quote, and we are not claiming a matched-package saving.
Both landing pages advertised dispatch within 24–48 hours. That general estimate does not verify every variant or guarantee delivery to your address. Prices, configuration availability and promotions can change.
Build both complete carts
For Ares 2.0, include:
- Ares 2.0 configuration for your rack.
- Optional weight-stack upgrades.
- Required crossmember or rack modifications.
- Required stability components.
- Optional leg rollers and cable accessories.
- Any new rack components if you don't already own a compatible rack.
- Professional assembly, if selected.
- Applicable taxes and any additional delivery-related charges.
For Dual Selectorized Athena, include:
- Left-side selectorized Athena.
- Right-side selectorized Athena.
- Optional stack upgrades for each side.
- Any required crossmembers or rack components.
- Optional lat pulldown and low row attachment.
- Rear Base Stabilizer 2.0 if required for the chosen combination.
- Additional storage or other accessories.
- Professional assembly, if selected.
- Applicable taxes and any additional delivery-related charges.
If you choose the plate-loaded Athena instead, use a separate calculation. Include plates you need to purchase and any storage changes.
Build both configurations in REP's current U.S. configurators and compare the actual carts, line by line.
Don't subtract two advertised starting prices and call the result your savings.
The pages advertise free shipping with exceptions including Alaska, Hawaii, wholesale and commercial orders. Professional assembly is a separately billed service, even when described as having no upfront cost. Confirm delivery access, any extra services and the final checkout total for your address.
Plan freight delivery and check return conditions
REP's Ares 2.0 FAQ describes a freight shipment delivered in a substantial crate.
The manufacturer says the Ares shipment exceeds 1,000 pounds, with the equipment packaged into multiple boxes inside the crate.
That does not mean you'll personally lift a 1,000-pound object. It does mean delivery access, handling, assembly space, and packaging disposal deserve planning.
Athena shipping can vary between regular ground delivery and freight depending on the configuration and quantity ordered.
Neither system is a small package you should expect to handle like a pair of adjustable dumbbells.
The return terms deserve the same attention as the delivery arrangements.
On November 15, 2026, REP's U.S. selectorized Athena product page advertised a 30-day money-back offer. Its written U.S. return policy describes a 30-day return window beginning when the order is received. That is not an unrestricted home trial.
REP requires return authorization, original packaging and resalable condition. Return shipping fees are deducted from the refund. If REP accepts a return without original packaging or with missing components, a 15% restocking fee may apply. Used or damaged products can be refused, and clearance items are excluded from ordinary returns.
An assembled item is not automatically eligible merely because the page mentions 30 days. REP says many products can be disassembled and repacked, but buyers should ask before opening or assembly if they are unsure whether a particular item can be returned.
The Ares 2.0 builder also displays a general money-back message. That alone does not establish return eligibility for every selected attachment, accessory or configuration. Before ordering Ares, confirm the return terms for the actual cart, including any exclusions.
If a configuration depends on an unclear compatibility detail, we'd get written confirmation from REP before paying. A possible return is no substitute for knowing whether the system fits your rack.
REP's warranty page lists lifetime coverage for rack and functional-trainer frames and structural welds, but one year for pop-pins, pulleys, bearings and cables. The terms exclude normal wear, apply lifetime coverage to the original purchaser and contain geographic and misuse restrictions. A warranty is not a change-of-mind return window; confirm the terms that apply to your order.
Choose neither if...
- Your rack isn't compatible.
- You can't meet the required anchoring or stability conditions.
- You don't have enough operating room.
- You can't safely accommodate delivery or assembly.
- You can't accept the return conditions, shipping deductions or other costs that apply to your selected order.
- You mainly train with barbells and free weights and don't have a clear use for the cable system yet.
There's no reason to spend thousands of dollars just to add features you don't currently need.
The five-question buying checklist
- What exact rack do I own? Include generation, height, post count, and crossmembers.
- Which exercises am I actually missing? Adjustable cable movements alone, or also heavy pulldowns and rows?
- What resistance do I need at the handle? Account for the pulley ratio.
- Does the completed system fit? Check equipment, operating clearance, storage, and stability.
- What are the complete order cost and return conditions? Compare exact cart totals, obtain written compatibility confirmation and check return eligibility, packaging requirements, shipping deductions and possible fees for the selected configuration.
Configure the exact REP attachment
Compare the exact model, included accessories, delivery, and return terms on the seller’s page.
These seller links are not currently affiliate links. How our links work. Prices, stock, and terms can change.
REP Ares 2.0
Choose it for: Integrated lat pulldowns, seated rows and higher selectorized resistance for a verified compatible REP rack.
Check before ordering: Starting price is not a complete installation. Confirm configuration, dimensions, included handles and current return eligibility and conditions for the exact order.
Configure REP Ares 2.0 at REPOpens repfitness.comDual Selectorized Athena
Choose it for: Two adjustable cable stations when you do not need an integrated lat and row system.
Check before ordering: Select both sides and selectorized loading. The $949.99 headline is not this dual package; check rack generation and all cart selections. REP's U.S. selectorized product page advertises 30-day money back, subject to written terms and exclusions.
Configure Dual Selectorized Athena at REPOpens repfitness.comSources & research notes
This is a manufacturer-sourced, research-based comparison, not a hands-on review. We checked the linked U.S. REP pages and the Athena configurator on November 4, 2026. Starting prices and one exact Athena attachment subtotal are dated observations, not a matched pair of complete installed quotes. The Ares configurator stalled before a comparable package could be verified. Manufacturer depth, accessory and compatibility wording differences are disclosed in the article. No purchase, assembly, independent performance test or owner-feedback analysis was performed.
U.S. return information checked November 15, 2026. Specifications, configurations, compatibility and historical prices retain their November 4, 2026 research date.
- REP Ares 2.0 builder: configurations, resistance, accessories, starting price (opens in new tab)
- REP Athena builder: dual selectorized configuration, resistance, travel, subtotal and compatibility (opens in new tab)
- REP guide to choosing a cable machine: differences between attachment systems (opens in new tab)
- REP Ares 2.0 four-post page: compatible configurations and stability requirements (opens in new tab)
- REP Ares 2.0 six-post page: freight, specifications and conflicting accessory/depth descriptions (opens in new tab)
- REP warranty information: component coverage and exclusions (opens in new tab)
- REP U.S. selectorized Athena: advertised 30-day money-back offer, checked November 15, 2026. (opens in new tab)
- REP U.S. returns and cancellations: return window, authorization, packaging, shipping deductions, possible fees and exclusions, checked November 15, 2026. (opens in new tab)

