FitRestFuelSearch articles
FIT / BUYING GUIDE

Which PowerBlock Kettlebell Handle Fits Your Set?

An attachment can save you buying another weight, but only if it fits the PowerBlocks you own. The three handles have different compatibility lists.

We may earn a commission from qualifying purchases through these links. As an Amazon Associate I earn from qualifying purchases. Amazon prices are shown on Amazon; dated prices from other retailers are not Amazon quotes. How our links work. Prices, stock, and terms can change.

Sources last checked November 8, 2026.

Jump to a section

Find your dumbbell family in this chart

PowerBlock lists three separate kettlebell-handle attachments on its US store. Read the whole model name on your set: a word as small as USA, or the number 100, changes which one belongs in your cart.

On a small screen, swipe the table sideways.

Your PowerBlock modelMatching attachmentHandle SKUWatch for this mix-up
Elite USA 90 model familyElite USA Kettlebell Handle340-00632-00Elite EXP is a different system and is excluded.
Pro 100 EXP or Commercial Pro 100Pro 100 Kettlebell Handle340-00630-00Not the Pro Series handle.
Pro 50 or Pro EXP; Commercial Pro 50 or Commercial Pro 90Pro Series Kettlebell Handle340-00625-03The word Pro does not include Pro 100 EXP here.
Urethane U50, U70 or U90Pro Series Kettlebell Handle340-00625-03Match the complete U-series designation.
Elite EXPNone of these three handlesNo matching SKU hereDo not order the Elite USA attachment for it.

Elite USA 90 is the current product-family name; PowerBlock sells it in 50-, 70- and 90-pound dumbbell configurations. Those numbers describe the dumbbell options, not a verified list of kettlebell settings.

An older, relabeled or unidentified set needs a separate check with PowerBlock. This chart does not establish compatibility for an unlisted model just because the handle appears to fit.

Sources: 1, 2, 3, 4, 5

The selector pin and weight stack are not in the box

Each listing is for one handle. It does not include weight plates or a selector pin. PowerBlock tells you to use the pin from the matching dumbbell set, so an inexpensive used stack with a missing pin is not ready to convert just because you bought the attachment.

For two kettlebells at once, you need two matching handles, two compatible stacks and the correct pin for each. One handle moves between your stacks; it does not turn both into kettlebells at the same time.

If you cannot identify the set or pin, send PowerBlock clear photos and the label details before ordering. Ask them to confirm the handle SKU and the correct selector pin together. Do not substitute a pin from another family or improvise a retaining piece.

Sources: 1, 2, 3, 4

A $149 listing is one attachment, not a pair of kettlebells

On November 8, 2026, PowerBlock's US pages listed all three handles at $149 each. Two handles therefore total $298 before tax and any applicable shipping. That calculation assumes you already own the compatible weights and pins.

For a routine that uses one kettlebell at a time, a second handle may add no useful benefit. Start with the number your exercises actually require.

If you are starting without a PowerBlock set, compare the entire purchase with a standalone kettlebell. The attachment price leaves out the most substantial part of the setup: the weights. Reusing equipment can save space, but buying a whole dumbbell system just to convert it deserves a different cost comparison.

Sources: 1, 2, 3

Your small dumbbell weight steps do not carry over automatically

All three product pages specify a 10-pound handle without micro-weight ports. The Pro Series page also explicitly says its micro weights are incompatible. You cannot assume the small adjustments available in your normal dumbbell handle survive the swap.

The bare handle alone weighs more than a 5-pound starting load. At the other end, owning a set marketed as 90 or 100 pounds does not by itself establish every loaded kettlebell setting. We have not verified a complete setting-by-setting load chart for these conversions.

If a particular starting weight or increment matters to your program, have PowerBlock confirm the total loads for your exact stack and attachment before paying. That is more useful than discovering after delivery that the next setting is too large a jump.

Sources: 1, 2, 3

Choose the grip only after the model matches

The Elite USA and Pro 100 handles offer a 90-degree change in grip orientation. The Pro Series handle is fixed. All three list a 25 mm grip diameter. These are design differences, not evidence that one will feel better in your hands.

Compatibility comes first. A Pro 50 owner cannot choose the Pro 100 handle simply to get the rotating grip. If you want a different shape or feel from the attachment your set accepts, a separate kettlebell may be the more useful purchase.

For installation and locking, follow the instructions for that exact combination. This guide identifies the purchase; it is not a substitute for those instructions.

Sources: 1, 2, 3

We may earn a commission from qualifying purchases through these links. As an Amazon Associate I earn from qualifying purchases. Amazon prices are shown on Amazon; dated prices from other retailers are not Amazon quotes. How our links work. Prices, stock, and terms can change.

Manufacturer sources and limits

Sources checked November 8, 2026. This guide compares PowerBlock's US product specifications and listed compatibility, checked November 8, 2026. We did not physically fit or exercise with these handles. Prices are dated snapshots, not stock guarantees. Older or unidentified sets and exact loaded weight increments need confirmation from PowerBlock. These are attachments for existing weights, not complete kettlebells.

  1. PowerBlock Elite USA Kettlebell Handle: exact model exclusions, SKU, price, included parts and grip. (opens in new tab)
  2. PowerBlock Pro 100 Kettlebell Handle: Pro 100 EXP and Commercial Pro 100 compatibility, SKU, price and excluded parts. (opens in new tab)
  3. PowerBlock Pro Series Kettlebell Handle: supported Pro and Urethane models, fixed grip, SKU, price and micro-weight restriction. (opens in new tab)
  4. PowerBlock product FAQ: Elite USA and Elite EXP parts are not interchangeable; uncertain models require manufacturer identification. (opens in new tab)
  5. PowerBlock Elite USA 90 dumbbells: current 50-, 70- and 90-pound configurations within this model family. (opens in new tab)
Back to top ↑