Which Ironmaster Super Bench attachments fit the PRO V2?
Most Ironmaster Super Bench attachments fit the Super Bench PRO V2, but there are two important exceptions you should not guess about.
Sources last checked November 12, 2026.
The original Leg Attachment does not fit the PRO V2. You need the Leg Attachment PRO.
The original Super Bench Wheel Kit is also the wrong version. The PRO V2 uses the Wheel Kit for Super Bench PRO, although the bench already comes with wheels on one end.
There is one more complication for people carrying equipment over from an older Ironmaster setup. Current Cable Towers are compatible with the PRO V2, but an older Cable Tower originally built around the first Super Bench may need Ironmaster's updated universal bench connector.
Most of the other familiar attachments carry over. If you are still choosing the bench itself, see our Super Bench PRO V2 versus REP Nighthawk comparison.
Jump to a section
Quick Super Bench PRO V2 compatibility table
On a small screen, swipe the table sideways.
| Ironmaster attachment or accessory | Fits PRO V2? | What to know |
|---|---|---|
| Crunch Situp Attachment | Yes | Fits all Super Bench generations |
| Bar Dip Handle | Yes | Current Super Bench/PRO version fits |
| Chin Up Bar | Yes | Fits old and new Super Bench models |
| Preacher Curl Pad | Yes | Fits all Super Bench models, including PRO V2 |
| Leg Attachment PRO | Yes | This is the correct leg attachment |
| Original Leg Attachment | No | Made for the original Super Bench |
| Cable Tower Attachment V2/PRO, current version | Yes | Current stock includes universal bench connector |
| Older Cable Tower | Maybe | May require updated universal connector |
| Hyper Core Attachment | Yes | Compatible with Super Bench and PRO system |
| Nordic Curl/Leg Hold Down | Yes | Current Super Bench/PRO attachment |
| Seated Press Pad | Yes | Fits Super Bench models including PRO V2 |
| Head Extension | Yes | Fits Super Bench and PRO generations |
| Dumbbell Spotting Stand | Yes | Designed for Super Bench/PRO |
| Spotting Stand Base | Yes | Works with Super Bench and Super Bench PRO |
| Kickstand | Yes | Fits Super Bench and PRO |
| Bench Handle | Yes | Compatible, but PRO V2 already has one handle |
| Wheel Kit for Super Bench PRO | Yes | Adds wheels to the second end |
| Original Super Bench Wheel Kit | No | Buy the PRO version instead |
| Hybrid Bench Grip Pad | Yes | Already standard on current PRO V2 benches |
| Replacement Incline Seat | Yes | Complete seat assembly fits all Super Bench generations |
| Incline Seat Grip Pad | Yes | Pad-only replacement fits PRO V2; excludes older rectangular four-bolt seats |
The safest shortcut when shopping current Ironmaster parts is to look for "/PRO" or "PRO" in the product name, but do not make that your only rule. The Hyper Core, for example, is also supported, and older equipment such as a Cable Tower needs to be checked by generation.
Sources: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23
The Leg Attachment is the easiest expensive mistake
Ironmaster sells two visually similar leg-extension and leg-curl attachments.
They are not interchangeable.
Super Bench PRO V2
Use:
Leg Attachment PRO for Super Bench PRO
Ironmaster says this attachment is made specifically for the Super Bench PRO and PRO V2. Its overall load rating is 200 pounds. It accepts standard plates, Olympic plates with the included sleeve adapter, and compatible Ironmaster Quick-Lock plates.
For Quick-Lock plates on the standard plate holder, Ironmaster specifies up to 100 pounds. It also warns that Quick-Lock plates made before 2011 may not fit because of their center-hole size.
Ironmaster instructs users to set the PRO bench at the 10-degree position and keep the attachment's support foot on the floor.
Original Super Bench
Use:
Leg Attachment for Super Bench
Ironmaster's current product page explicitly labels this version "not for PRO model" and says it is not compatible with the Super Bench PRO.
That distinction matters if you are buying used equipment. A listing that simply says "Ironmaster Leg Attachment" has not told you enough.
Ask for the exact version before buying.
The wheel kits are also bench-specific
The same problem appears with the wheel kits.
Ironmaster sells an original Wheel Kit for Super Bench and a separate Wheel Kit for Super Bench PRO.
The PRO V2 already includes wheels on one foot as standard equipment, so you do not need a wheel kit just to make the bench movable.
The optional PRO wheel kit adds another pair of wheels to the opposite end. That lets you roll the bench from either side instead of walking around to the end that already has wheels.
If you find an older original-Super-Bench wheel assembly for sale, do not assume it bolts onto the PRO V2. Ironmaster identifies the leg attachments and wheel kits as the exceptions to its otherwise broad cross-generation attachment compatibility.
Current Cable Towers fit, but older ones deserve a closer look
The current Cable Tower Attachment V2/PRO fits every version of the Super Bench, including the PRO V2.
The tower must be attached to a supported Super Bench or the Cable Tower Seat before use.
Ironmaster says current Cable Tower stock includes an updated universal bench connector that fits the Super Bench PRO and PRO V2.
That does not mean every used Ironmaster Cable Tower already has the right connector.
Ironmaster specifically notes that older Cable Towers built only for the original Super Bench may require the updated universal bench connector.
This creates a useful used-equipment question:
Does the Cable Tower include the newer universal bench connector?
If the seller cannot tell you, identify the Cable Tower generation and confirm it with Ironmaster before buying.
Do not reject an older Cable Tower automatically. The compatibility problem may be the connector rather than the tower itself.
The common receiver attachments generally carry over
The familiar attachments that plug into the Super Bench attachment receiver are much less complicated.
Crunch Situp Attachment
Yes.
Ironmaster explicitly says the current Crunch Situp Attachment fits all of its Super Bench models, including the PRO V2.
It can hold the legs in place for abdominal work and steeper decline positions.
Bar Dip Handle
Yes.
The current Bar Dip Handle is sold for the Super Bench and PRO system and is supported on the PRO V2.
It can be installed in different orientations for dips or knee and leg raises.
Chin Up Bar
Yes.
Ironmaster says the Chin Up Bar fits old and new Super Bench models, including the PRO V2.
There is a separate room-fit issue to check before buying it. The bar can reach roughly 77 to 88 inches at its handle centerline depending on adjustment, and Ironmaster recommends additional clearance above the bar for your head during a pull-up.
Attachment compatibility therefore does not establish ceiling compatibility. Our low-ceiling gym guide explains how to separate equipment height from the headroom needed for pull-ups.
Preacher Curl Pad
Yes.
The current Preacher Curl Pad fits all Ironmaster Super Bench models, including the PRO V2.
It also has bar hooks, but Ironmaster limits the recommended load on those hooks to 120 pounds to keep the bench stable.
The Hyper Core also works with the PRO V2
The Hyper Core Attachment is another example of why searching only for "/PRO" in the name is useful but imperfect.
Ironmaster lists the Hyper Core as compatible with both the original Super Bench and the Super Bench PRO system, and the current PRO V2 page includes it among compatible accessories.
The geometry differs slightly depending on which bench you use. Ironmaster says it creates a 45-degree hyperextension setup with the Super Bench PRO and about 40 degrees with the original Super Bench.
It also adds substantial space beyond the bench itself, so this is an attachment where room dimensions matter in addition to mechanical compatibility.
The Nordic Curl/Leg Hold Down fits
The current Nordic Curl/Leg Hold Down for Super Bench/PRO fits the PRO V2.
It uses the same attachment receiver and can be used for Nordic curls, situps, decline work, Bulgarian split-squat support and as a leg hold-down for lat pulldowns.
Ironmaster includes an important stability warning for cable work: the bench must be properly weighted or anchored during lat pulldowns to counteract lifting forces.
That is a usage requirement, not a compatibility problem.
The Head Extension fits all Super Bench generations
The Head Extension for Super Bench/PRO fits the PRO V2.
Ironmaster designed it to add 8 inches of head support. On both current bench families it brings the supported bench length to approximately 52 inches.
Ironmaster also says the extension is for head support only and should not be used as a seat.
For taller users who already own an older Head Extension, this is one of the accessories that can carry over instead of being replaced when moving to a PRO V2.
The Seated Press Pad fits
The Seated Press Pad for Super Bench/PRO is compatible with the PRO V2.
It mounts at the end of the bench to provide a smaller back-support surface for seated and overhead pressing while leaving more room around the shoulders and upper back.
There is no separate PRO V2 version you need to hunt down.
Dumbbell Spotting Stands work with the PRO V2
Ironmaster's Dumbbell Spotting Stand for SB/PRO also works with the PRO V2.
Unlike the small receiver accessories, the stand does not simply plug into the end of the bench. The bench sits in the stand's base-frame yoke.
Ironmaster rates each dumbbell saddle to 130 pounds and allows the stand to be used with the bench in flat, incline, decline and upright positions.
The related Spotting Stand Base for SB/PRO works with both Super Bench families as well. It can be combined with Ironmaster's Barbell Adapter instead of the dumbbell saddles.
The Barbell Adapter is therefore an attachment for the spotting-stand system, not something that plugs directly into the PRO V2.
The spotting stand needs the bench for stability. The base is not a standalone rack; Ironmaster requires you to be on the bench when using it with the Barbell Adapter.
The Kickstand fits, but it is for storage
The Kickstand for Super Bench/PRO fits the PRO V2's attachment receiver.
Its purpose is different from the exercise attachments. It stabilizes the bench while it is stored vertically and helps keep the top of the bench pad off the floor.
Ironmaster says it is particularly useful on carpet.
Because it occupies the same receiver used by workout attachments, it is something you install for storage rather than leave in place while another receiver attachment is connected.
Sources: 19
The extra Bench Handle fits, but the PRO V2 already includes one
Ironmaster sells a Bench Handle for Super Bench/PRO.
It fits the PRO V2, but current PRO V2 benches already come with a handle on one end and wheels on the other.
The extra handle is mainly useful if you want a handle on both ends, particularly if you also add the second PRO wheel kit.
That makes this a compatibility "yes" but not automatically a useful purchase.
Do not accidentally buy a Hybrid Bench Grip Pad you already have
The Hybrid Bench Grip Pad fits the PRO V2.
For a current PRO V2 buyer, however, compatibility is not the important question.
Ironmaster says that all Super Bench PRO V2 benches have shipped with the updated Hybrid Bench Grip Pad as standard equipment since May 2025.
The pad is therefore useful as a replacement, or as an upgrade for an older compatible Ironmaster bench, but a new PRO V2 owner should not automatically add one to the order.
The current pad is 44 inches long, with one section approximately 10.25 inches wide and the other 12.25 inches wide.
Sources: 21
The incline seat is already included too
Every PRO V2 includes its incline seat.
Ironmaster sells the Incline Seat for Super Bench/PRO separately as a replacement part, and the complete replacement seat assembly fits all generations of the Super Bench and Super Bench PRO.
The current replacement Incline Seat Grip Pad also fits the PRO V2. This is the pad only, without the seat frame. Unlike the complete replacement seat assembly, it does not fit older rectangular incline-seat pads with a four-bolt connection.
So if your new PRO V2 already has its seat, neither item is an additional exercise attachment you need to buy.
They are replacement parts.
Do not confuse Cable Tower accessories with bench attachments
Ironmaster's bench collection includes several products that are related to the Super Bench ecosystem without attaching directly to the bench.
The Cable Tower Seat, for example, gives the Cable Tower a standalone seating option. You can use the Cable Tower with the PRO V2 or with that seat, but the seat itself is not an upgrade that plugs into the PRO V2.
Likewise, the Barbell Adapter for Spotting Stand attaches to the Spotting Stand Base rather than directly to the bench.
This distinction becomes important when shopping Ironmaster's package builder, where bench accessories, related equipment and true receiver attachments can appear close together.
What if you already own attachments from the original Super Bench?
Do not assume you need to replace the whole collection.
Start with this rule:
Most original Super Bench attachments carry over to the PRO V2.
Then isolate the exceptions.
Replace or verify these first
Original Leg Attachment: does not fit. You need the Leg Attachment PRO.
Original Wheel Kit: does not transfer. Use the PRO wheel kit if you want wheels on the second end.
Older Cable Tower: may need the updated universal bench connector.
Usually reusable
Current Ironmaster documentation supports carrying over attachments such as:
- Crunch Situp Attachment
- Bar Dip Handle
- Chin Up Bar
- Preacher Curl Pad
- Head Extension
- compatible Cable Tower with the correct connector
- Hyper Core
- Dumbbell Spotting Stand
- Spotting Stand Base
- Bench Handle
For anything discontinued or old enough that its exact generation is unclear, get the product name, part number or photos of the connection hardware and confirm it with Ironmaster before ordering the PRO V2.
Check more than whether the attachment connects
A mechanically compatible attachment can create a second problem in a small gym.
The Chin Up Bar needs overhead clearance.
The Hyper Core increases the working footprint.
The Cable Tower is roughly 86 inches tall and creates a much longer combined setup when the bench is connected.
The Dumbbell Spotting Stand is wider than the bench itself.
The attachment therefore needs to pass two checks:
- Does it fit the PRO V2?
- Does the completed setup fit your room and the exercises you want to perform?
That distinction matters most when the reason for choosing the Ironmaster system is to save space.
Before buying a used Ironmaster attachment
Ask the seller for the exact product name instead of accepting "Super Bench attachment."
Then check:
- whether the listing says Super Bench, Super Bench PRO or Super Bench/PRO
- whether it is the original or PRO leg attachment
- which wheel kit it is
- whether an older Cable Tower has the updated universal connector
- whether all pins, adapters, pads and hardware are included
- whether the attachment has been modified
A low price on the wrong-generation Leg Attachment is not a deal if it cannot connect to your bench.
The simple compatibility rule
The Super Bench PRO V2 keeps most of the original Ironmaster attachment ecosystem.
The two clear model-specific purchases are the Leg Attachment PRO and Wheel Kit for Super Bench PRO. Current Cable Towers fit, while older ones may require an updated connector.
Most of the familiar exercise attachments, including the Crunch Situp, Dip Handle, Chin Up Bar, Preacher Curl Pad, Hyper Core, Nordic Curl/Leg Hold Down, Seated Press Pad and Head Extension, work with the PRO V2.
If you are moving from an original Super Bench to the PRO V2, check the leg attachment, wheels and Cable Tower first. Those are the places where assuming everything transfers can cost you money.
Sources & research notes
Sources checked November 12, 2026. Checked against Ironmaster's current product pages, compatibility FAQ and model-specific manuals on November 12, 2026. This is a manufacturer-documentation guide, not a hands-on attachment test. Confirm the exact generation and connection hardware with Ironmaster when buying older or discontinued equipment.
- Super Bench PRO V2: included equipment and compatible accessories (opens in new tab)
- Ironmaster FAQ: original versus PRO compatibility exceptions (opens in new tab)
- Leg Attachment PRO: load ratings, plate compatibility and bench position (opens in new tab)
- Original Leg Attachment: not compatible with PRO (opens in new tab)
- PRO Wheel Kit: additional wheels for the opposite end (opens in new tab)
- Original Super Bench Wheel Kit: not for PRO (opens in new tab)
- Cable Tower V2/PRO: universal connector, required support and height (opens in new tab)
- Crunch Situp Attachment: all Super Bench generations (opens in new tab)
- Bar Dip Handle: PRO V2 and exercise orientations (opens in new tab)
- Chin Up Bar: compatibility, handle centerline and head clearance (opens in new tab)
- Preacher Curl Pad: compatibility and 120-pound hook recommendation (opens in new tab)
- Hyper Core: bench compatibility, geometry and operating space (opens in new tab)
- Nordic Curl/Leg Hold Down: uses and required lat-pulldown stabilization (opens in new tab)
- Head Extension: eight-inch head support, not a seat (opens in new tab)
- Seated Press Pad: compatible bench and pressing support (opens in new tab)
- Dumbbell Spotting Stand: bench interface and 130-pound saddle rating (opens in new tab)
- Spotting Stand Base: both bench families and barbell adapters (opens in new tab)
- Barbell Adapter: requires Spotting Stand Base and occupied bench (opens in new tab)
- Kickstand: bench compatibility and vertical storage (opens in new tab)
- Bench Handle: fit and optional second handle (opens in new tab)
- Hybrid Bench Grip Pad: standard since May 2025 and dimensions (opens in new tab)
- Replacement Incline Seat: complete assembly and all generations (opens in new tab)
- Incline Seat Grip Pad: pad only and older four-bolt exclusion (opens in new tab)
- Cable Tower Seat: alternative to the bench, not standalone equipment (opens in new tab)
- Leg Attachment PRO manual: 10-degree position and support-foot floor contact (opens in new tab)
- Nordic Curl manual: PRO V2 setup and stability requirements (opens in new tab)
- Hyper Core 2025 manual: PRO V2-specific base-foot update (opens in new tab)
- Dumbbell Spotting Stand manual: bench stabilization and saddle limits (opens in new tab)
- Spotting Stand Base manual: occupied bench required, no standalone use (opens in new tab)
