FitRestFuelSearch articles
FUEL / COMPATIBILITY GUIDE

Which Replacement Bowl, Lid and Blades Fit the Cuisinart Custom 14?

Cuisinart still sells a surprisingly complete selection of replacement parts for the Custom 14 food processor.

Sources last checked November 11, 2026.

The catch is that Custom 14 is a product family, not one single parts configuration.

If your machine is the current DFP-14BCNY, Cuisinart currently lists the replacement bowl, cover, chopping blade, dough blade, disc stem and several slicing and shredding discs directly on the machine's official parts page.

Many older DFP-14 models share those parts. Some special editions do not.

Before buying anything, turn the processor around or check its model label and write down the complete model number, including the letters after DFP-14.

Jump to a section

Replacement parts for the current DFP-14BCNY

For the current Custom 14 DFP-14BCNY, these are the important Cuisinart replacement numbers:

On a small screen, swipe the table sideways.

PartCuisinart part number
14-cup work bowlDLC-005AGTXT1
Work bowl coverDFP-14NWBCT1
Large pusherDLC-2014PT1
Small pusherDLC-2014SPT1-1
Metal chopping/mixing bladeDLC-001TXB
Dough bladeDLC-019ATX-1
Detachable disc stemDLC-039ATX-1
Medium shredding discDLC-037TX-1
Standard 4mm slicing discDLC-044TX-1
Fine shredding discDLC-034TX-1
Fine grating discDLC-035TX-1
French-fry discDLC-036TX-1
Thin 2mm slicing discDLC-042TX-1
Thick 6mm slicing discDLC-046TX-1
Extra-thick 8mm slicing discDLC-048TX-1

Cuisinart currently lists all of these on the DFP-14BCNY parts page.

The model number matters more than how similar a replacement part looks in a product photo.

Sources: 1

The correct replacement bowl is DLC-005AGTXT1

For the current DFP-14BCNY, Cuisinart's replacement 14-cup work bowl is:

DLC-005AGTXT1

Cuisinart describes it as the Work Bowl for Select 14 Cup Food Processors and explicitly lists DFP-14BCNY among the compatible machines.

The same bowl is also officially listed for several older Custom 14 models, including:

  • DFP-14
  • DFP-14BCHN
  • DFP-14BCN
  • DFP-14BCNR
  • DFP-14BCWN
  • DFP-14BWN
  • DFP-14CPY

That is useful if you have an older machine and the motor base is still working.

It does not mean every Cuisinart food processor with a 14-cup capacity uses this bowl.

Cuisinart has produced multiple 14-cup food-processor families, and some Custom 14 special editions use their own bowl.

Sources: 3

The lid is called the Work Bowl Cover

Cuisinart calls the replacement lid for the current Custom 14 the:

Work Bowl Cover, DFP-14NWBCT1

It is officially listed for DFP-14BCNY and multiple older DFP-14 variants.

This is worth checking carefully when shopping elsewhere because sellers may describe it simply as:

  • Custom 14 lid
  • food processor cover
  • feed-tube cover
  • work-bowl lid

The Cuisinart part number is more useful than those descriptions.

Match DFP-14NWBCT1.

Sources: 4

The pushers are separate parts

The cover includes the large feed-tube structure, but Cuisinart lists the pushers separately.

For DFP-14BCNY, the current official parts page lists:

  • Large pusher: DLC-2014PT1
  • Small pusher: DLC-2014SPT1-1

Cuisinart also currently shows another small-pusher listing, DLC-2014SPT-RM, on the DFP-14BCNY parts page. The current page does not clearly explain the difference between that listing and DLC-2014SPT1-1.

If you are replacing only the small pusher and both numbers appear for sale, verify the current recommendation with Cuisinart rather than assuming the different suffix is merely a cosmetic change.

Cuisinart also sells a Work Bowl Assembly Kit, FP-KIT14T, containing the bowl, cover and pushers for several DFP-14 models, including DFP-14BCNY.

That kit can make more sense when multiple clear plastic parts are cracked or missing.

If only the bowl broke, you do not need to replace the entire upper assembly.

Sources: 1, 5, 6, 7, 8

The chopping blade is DLC-001TXB

The stainless chopping and mixing blade for the current DFP-14BCNY is:

DLC-001TXB

Cuisinart explicitly lists it as compatible with DFP-14BCNY as well as numerous older 14-cup models.

This is the main metal blade used for chopping, mixing, mincing and pureeing.

Do not confuse it with a slicing or shredding disc.

Those are separate accessories that mount higher in the work bowl and use the disc system.

If you are replacing the central chopping blade, DLC-001TXB is the part number to match.

Sources: 9, 23

The dough blade is a different part

The replacement dough blade is:

DLC-019ATX-1

Cuisinart currently lists it for DFP-14BCNY and several other Custom 14 variants.

The dough blade is not a substitute for the metal chopping blade.

If the metal blade is missing, buying DLC-019ATX-1 does not restore the processor's ordinary chopping and pureeing setup.

Match the part to the job you are replacing.

Sources: 10, 23

The original slicing disc is 4mm

The current DFP-14BCNY comes with a 4mm slicing disc and a medium shredding disc as its standard slicing and shredding accessories.

The replacement 4mm disc is:

DLC-044TX-1

Cuisinart currently lists it for DFP-14BCNY along with many earlier DFP-14 machines.

If you lost the slicing disc that originally came with the processor and simply want the original thickness back, this is the one to look for.

Cuisinart also sells other fixed-thickness slicing discs for this machine.

Sources: 2, 13

The original shredding disc is DLC-037TX-1

The medium shredding disc supplied with the Custom 14 is:

DLC-037TX-1

Cuisinart explicitly lists DFP-14BCNY among its compatible models.

This is the standard shredding disc to replace if the original is missing or damaged.

There is also a finer shredding option, which is a different part.

Sources: 2, 12

You can add thinner and thicker slicing discs

The Custom 14 is not limited to the standard 4mm disc.

Cuisinart currently lists these additional compatible slicing discs for DFP-14BCNY:

  • DLC-042TX-1: 2mm thin slicing disc
  • DLC-046TX-1: 6mm thick slicing disc
  • DLC-048TX-1: 8mm extra-thick slicing disc

All three are explicitly listed as compatible with DFP-14BCNY.

These are fixed-thickness discs.

That means you choose the disc that creates the thickness you want rather than turning a dial to adjust one disc.

If the 4mm disc you already own does the jobs you need, there is no reason to buy the others merely because they fit.

Sources: 14, 15, 16

There are additional shredding, grating and fry-cut discs

Cuisinart also lists:

  • DLC-034TX-1: fine shredder
  • DLC-035TX-1: fine grater
  • DLC-036TX-1: 6x6 French-fry-cut disc

for the DFP-14 family, including DFP-14BCNY in the current compatibility listings.

These are optional additions rather than parts you need to restore the processor to its standard original setup.

If you bought a used Custom 14 and want to know what it originally should have included, concentrate first on:

  • metal chopping blade
  • 4mm slicing disc
  • medium shredding disc
  • detachable disc stem
  • large and small pushers

Those are part of the current DFP-14BCNY's standard package.

Sources: 2, 17, 18, 19

Do not forget the detachable disc stem

The slicing and shredding system also uses the detachable stem.

For DFP-14BCNY, the replacement is:

DLC-039ATX-1

Cuisinart explicitly lists that stem for the current machine and several older Custom 14 variants.

This creates an easy used-machine mistake.

Someone may buy a processor that appears to include several stainless discs, then discover that the stem needed to use those discs is missing.

Count the components, not merely the blades.

If you are buying a used Custom 14, verify that the detachable disc stem is included or factor a replacement into the purchase.

Sources: 11, 23

The 50th Anniversary DFP-14SENY is an important exception

Do not apply the main DFP-14BCNY bowl-and-cover list blindly to the 50th Anniversary Edition DFP-14SENY.

Cuisinart gives that model its own replacement bowl:

DFP-14SENYWB

and its own work bowl cover:

DFP-14SENYWBC

It also lists dedicated large and small pushers:

  • DFP-14SENYLP
  • DFP-14SENYSP

Cuisinart's current compatibility pages list those bowl and cover parts only for DFP-14SENY.

That is exactly why the phrase Custom 14 is not enough information when ordering replacement plastic parts.

Interestingly, Cuisinart does list some familiar accessories for the anniversary model, including the DLC-019ATX-1 dough blade, DLC-035TX-1 fine grating disc and DLC-048TX-1 extra-thick slicing disc.

Do not infer from those shared accessories that every normal DFP-14 blade or disc automatically fits the anniversary version.

Use the exact compatibility list for DFP-14SENY.

Sources: 20, 21, 22, 10, 18, 16

Older Custom 14 models often share parts, but verify the suffix

Cuisinart's current compatibility data shows substantial overlap among older models such as:

  • DFP-14
  • DFP-14BCHN
  • DFP-14BCN
  • DFP-14BCNR
  • DFP-14BCWN
  • DFP-14BWN
  • DFP-14CPY

Many of these share the current work bowl, cover, metal blade and fixed discs.

The lists are not identical for every discontinued model, and Cuisinart's parts catalog is more complete for some old machines than others.

That means an old processor with "DFP-14" on the front is not enough to place an order.

Read the complete label.

If the exact suffix does not appear on Cuisinart's compatibility page for the part you want, confirm it with Cuisinart before buying.

Sources: 3, 4, 9, 13

A 14-cup Cuisinart bowl is not automatically a Custom 14 bowl

Capacity is not a compatibility system.

Cuisinart has sold multiple food processors with 14-cup bowls.

The fact that two machines both hold 14 cups does not establish that they use the same:

  • locking tabs
  • handle
  • cover
  • feed tube
  • safety interlock
  • blade
  • disc stem

The same principle applies when buying third-party parts.

A listing that says "fits Cuisinart 14-cup food processors" is much less useful than one naming the exact DFP-14 model you own.

Use the Cuisinart part number as your reference.

Sources: 1, 20, 23

If the bowl and cover both broke, check the assembly kit first

Cuisinart currently lists FP-KIT14T as its combined Work Bowl Assembly Kit.

The kit contains the work bowl, cover and pushers and is officially mapped to several Custom 14 variants, including DFP-14BCNY.

This is worth checking before ordering several individual pieces.

The opposite is also true.

If only the bowl is cracked, replacing a complete assembly creates unnecessary expense.

Identify what is actually damaged before ordering.

Sources: 8

If your processor will not start, do not assume the motor failed

Food processors use safety interlocks that depend on the bowl and cover being assembled correctly.

If your Custom 14 stopped running immediately after a bowl, lid or pusher was damaged or replaced, verify that every replacement part is the correct one for the machine and that the unit is assembled according to Cuisinart's instructions before concluding that the motor is dead.

Our Cuisinart startup troubleshooting guide walks through the model-specific bowl, lid and safety-lock checks.

Do not defeat or modify a safety interlock to make an incompatible replacement part operate.

A part that almost fits is not a successful repair.

Sources: 23

What should you replace on a used Custom 14?

Do not automatically buy a complete set of new accessories.

Inspect what came with the machine.

If you have the current DFP-14BCNY, the basic set to identify is:

Work bowl: DLC-005AGTXT1

Cover: DFP-14NWBCT1

Large pusher: DLC-2014PT1

Small pusher: DLC-2014SPT1-1 or the currently listed replacement Cuisinart confirms for your machine

Metal blade: DLC-001TXB

Disc stem: DLC-039ATX-1

4mm slicing disc: DLC-044TX-1

Medium shredding disc: DLC-037TX-1

Buy additional discs only if you actually want the extra cuts they provide.

A drawer full of compatible accessories is not useful if the standard blade and cover are the only missing pieces preventing the processor from doing the jobs you bought it for.

Sources: 1, 2

Before ordering a replacement part

Use this sequence:

1. Read the complete processor model number

Do not stop at "Custom 14."

2. Identify the failed or missing component

Bowl, cover, pusher, metal blade, dough blade, stem and processing discs are separate parts.

3. Match the Cuisinart part number

For the current DFP-14BCNY, use the compatibility table above.

4. Check whether your model is a special edition

The DFP-14SENY is the clearest current example of why this matters.

5. Verify discontinued models individually

Some old DFP-14 variants share nearly everything with the current machine. Others have less complete compatibility documentation.

6. Do not buy by capacity alone

"14 cup" tells you how much the bowl holds.

It does not tell you whether the bowl locks onto your processor.

The easiest way to avoid the wrong part is to treat the model number and Cuisinart part number as a pair.

For a current DFP-14BCNY, that compatibility map is unusually well documented.

Use it.

Sources: 1, 20

Sources & research notes

Sources checked November 11, 2026. Cuisinart U.S. parts listings and the official Custom 14 instruction booklet checked November 11, 2026. This guide compares manufacturer compatibility documentation, not hands-on fit testing. If your exact model suffix is not listed, confirm the part with Cuisinart before buying.

  1. Cuisinart DFP-14BCNY: current parts catalog (opens in new tab)
  2. Cuisinart DFP-14BCNY: original package and specifications (opens in new tab)
  3. Cuisinart DLC-005AGTXT1: work bowl compatibility (opens in new tab)
  4. Cuisinart DFP-14NWBCT1: work bowl cover compatibility (opens in new tab)
  5. Cuisinart DLC-2014PT1: large pusher (opens in new tab)
  6. Cuisinart DLC-2014SPT1-1: small pusher (opens in new tab)
  7. Cuisinart DLC-2014SPT-RM: separate small-pusher listing (opens in new tab)
  8. Cuisinart FP-KIT14T: work bowl assembly kit (opens in new tab)
  9. Cuisinart DLC-001TXB: metal blade compatibility (opens in new tab)
  10. Cuisinart DLC-019ATX-1: dough blade compatibility (opens in new tab)
  11. Cuisinart DLC-039ATX-1: detachable stem (opens in new tab)
  12. Cuisinart DLC-037TX-1: medium shredding disc (opens in new tab)
  13. Cuisinart DLC-044TX-1: 4mm slicing disc (opens in new tab)
  14. Cuisinart DLC-042TX-1: 2mm thin slicing disc (opens in new tab)
  15. Cuisinart DLC-046TX-1: 6mm thick slicing disc (opens in new tab)
  16. Cuisinart DLC-048TX-1: 8mm extra-thick slicing disc (opens in new tab)
  17. Cuisinart DLC-034TX-1: fine shredder (opens in new tab)
  18. Cuisinart DLC-035TX-1: fine grater (opens in new tab)
  19. Cuisinart DLC-036TX-1: 6x6 French-fry-cut disc (opens in new tab)
  20. Cuisinart DFP-14SENY: 50th Anniversary parts catalog (opens in new tab)
  21. Cuisinart DFP-14SENYWB: anniversary work bowl (opens in new tab)
  22. Cuisinart DFP-14SENYWBC: anniversary work bowl cover (opens in new tab)
  23. Cuisinart Custom 14: official instructions and safety interlocks (opens in new tab)
Back to top ↑