FitRestFuelSearch articles
FUEL / HOW-TO

Aroma Rice Cooker Instructions: Water, Buttons, and Five Model Guides

Match the model number on your Aroma cooker to the right water measurement and cooking setting.

Sources last checked November 19, 2026.

You have the rice. You have the cooker. But the booklet is missing, and the number inside the pot doesn't tell you which button to press.

Let's get dinner started.

First, look for your Aroma model number. It usually begins with ARC- and appears on a silver sticker underneath or behind the cooker. Let the appliance cool and unplug it before turning it over to check.

Next, use the small measuring cup that came with the machine. It holds approximately 180 mL, or three-quarters of a regular U.S. measuring cup. That's the measurement Aroma uses for its rice instructions.

Now find your model in the table below. Don't assume every Aroma cooker uses the same water ratio, especially for brown rice. Some models use the numbered lines inside the pot; others have separate charts requiring water to be measured with the supplied cup.

Sources: Aroma model identification and Aroma measuring-cup explanation.

Jump to a section

Find your model: Aroma water and cooking instructions

All quantities in this table refer to the included Aroma rice measuring cup, not a standard U.S. cup.

On a small screen, swipe the table sideways.

Aroma modelControlsWhite-rice instructionsBrown-rice instructions
ARC-753SGOne Cook/Warm switchThe current quick-start guide specifies 1–3 rice cups. Add water to the matching numbered line.The cooking guide currently linked by Aroma specifies 1 rice cup maximum, with water to line 1.
ARC-614BPOne Cook/Warm switchUse the water line matching the number of rice cups. The manual's maximum-capacity wording conflicts; see the warning below.Measure water separately: 1 rice cup needs 1¾ cups water; 2 need 3; 3 need 4¼.
ARC-5104SBDigital White Rice and Brown Rice controlsUse the matching numbered line. The manual also provides an alternative measured-water chart.Use the matching numbered line or its measured-water chart, then select Brown Rice.
ARC-5104SBCDigital White Rice and Brown Rice controlsUse the matching numbered line for 1–4 rice cups.Use the matching numbered line for 1–4 rice cups, then select Brown Rice.
ARC-914SBDDigital White Rice, Brown Rice, and Flash RiceUse the matching numbered line for 1–4 rice cups. Flash Rice is an optional white-rice function.Use the matching numbered line for 1–4 rice cups and select Brown Rice. Do not use Flash Rice for brown rice.

Official instructions for each model:

If the model number on your cooker doesn't match any row, skip to the section on finding the correct manual. A similar-looking cooker is not proof that its instructions apply to yours.

Two important exceptions in those manuals

ARC-753SG: The current manufacturer-linked cooking guide permits only one supplied cup of brown rice and says to use water line 1. The current quick-start guide covers one to three cups of white rice. Don't carry that white-rice quantity over to brown rice.

Aroma has circulated older documentation for this model family. If your original booklet gives different brown-rice instructions, use the model and manufacture code to ask Aroma which revision applies to your cooker.

ARC-614BP: Aroma's manual contradicts itself about maximum capacity. Its white-rice table includes a four-cup batch, and one note permits four cups of white rice. Another sentence in the same note identifies three cups as the machine's maximum uncooked capacity.

Because those statements conflict, we cannot verify a four-cup maximum from that document alone. The instructions below use smaller batches. If you want to cook more than three supplied cups of white rice in an ARC-614BP, confirm the applicable limit with Aroma first.

How to measure the rice and water

Here's the part that trips people up.

The included Aroma cup is approximately 180 mL. A standard U.S. measuring cup is approximately 240 mL.

That means filling a regular one-cup measure with rice gives you more rice than filling Aroma's supplied cup once.

Aroma says you can use approximately ¾ of a standard U.S. cup if you've lost the supplied measure.

Source: Aroma: What the Included Measuring Cup Really Measures.

What does line 2 inside the pot mean?

On models whose manual instructs you to use the numbered water lines:

  1. Measure two level Aroma cups of dry rice.
  2. Rinse and drain the rice according to your model's instructions.
  3. Put the rice in the inner pot.
  4. Add fresh water until the combined rice-and-water level reaches the line marked 2.
  5. Place the pot in the cooker and select the correct program.

You are not being told to pour exactly two separate cups of water into an empty pot.

The line is a fill mark designed to be used after the rice is already inside.

Aroma explicitly instructs owners to add rice first, then water.

Source: Aroma: How to Measure Rice and Water Correctly.

That line method is useful, but it's not universal. The ARC-614BP's brown-rice table is an example of why the model matters.

ARC-614BP brown rice: use the separate water chart

If you own the ARC-614BP and want brown rice, don't use its white-rice water-line instructions as your starting point.

Its manufacturer manual gives these measurements:

On a small screen, swipe the table sideways.

Uncooked brown riceWater measured with the supplied Aroma cup
1 rice cup1¾ water cups
2 rice cups3 water cups
3 rice cups4¼ water cups

These are measurements from Aroma's brown-rice table, not ratios we've estimated.

For example, two level supplied cups of brown rice require three level supplied cups of water according to that chart.

Add the measured rice and water to the pot, close the lid, plug in the cooker, and press the Cook switch down. It will move to Warm when the cooking cycle finishes.

Source: ARC-614BP official manual, printed pages 7 and 9.

This is why a blanket statement such as "brown rice always needs twice as much water" isn't a reliable Aroma instruction.

ARC-5104SB: you can use pot lines or measured water

The ARC-5104SB's manual is different.

It gives two supported ways to measure water for white or brown rice:

On a small screen, swipe the table sideways.

Uncooked ricePot markingAlternative: water measured with supplied cup
1 rice cupLine 11½ water cups
2 rice cupsLine 22½ water cups
3 rice cupsLine 33½ water cups
4 rice cupsLine 44½ water cups

The same printed water measurements are given for white and brown rice on this model. But you still select the program corresponding to the rice you're cooking.

For two supplied cups of brown rice, for example:

  • Use water to line 2, or measure 2½ supplied cups of water.
  • Close the lid.
  • Press the power button.
  • Select Brown Rice.

The manual documents a maximum of four supplied cups of uncooked rice.

Source: ARC-5104SB official manual, printed pages 8 and 10.

Be careful with the model suffix. The ARC-5104SBC has its own manual. Its rice chart provides the numbered pot-line method, but does not provide the same alternative water-cup column. Don't transfer that extra measurement method to it without manufacturer confirmation.

How to use an Aroma cooker with one Cook switch

The ARC-753SG and ARC-614BP are examples of simpler cookers with a lever rather than separate rice-program buttons.

Once you've checked the correct measurements for your model:

  1. Measure your rice with the supplied cup.
  2. Rinse and drain as directed in the manual.
  3. Add the rice to the inner pot.
  4. Add water using the correct model-specific instructions.
  5. Make sure the outside of the pot is dry and free of debris.
  6. Set the pot properly inside the cooker and secure the lid.
  7. Plug in the cooker and push the Cook switch down.
  8. When cooking finishes, the switch moves to Warm.
  9. Stir or fluff the rice with the serving spatula.
  10. Unplug the cooker when you're finished.

There's no Brown Rice button to find on these two models.

What changes for brown rice is the manufacturer's preparation guidance, particularly the water amount and permitted batch size.

Keep hands clear of the steam vent and use care when opening the lid.

Sources: ARC-753SG current quick-start guide and ARC-614BP manual.

How to use an Aroma digital rice cooker

The ARC-5104SB, ARC-5104SBC, and ARC-914SBD have digital controls.

For their normal white- and brown-rice functions, the sequence is similar:

  1. Measure the amount of uncooked rice supported by your exact model.
  2. Rinse and drain it.
  3. Put the rice in the inner pot.
  4. Add water according to that model's chart.
  5. Make sure the pot's exterior is dry and place it properly inside the cooker.
  6. Close the lid and plug in the cooker.
  7. Press the power button.
  8. Select White Rice or Brown Rice, whichever you're preparing.
  9. Let the cooker complete its cycle. It will beep and switch to Keep Warm.
  10. Stir the finished rice. When you're done serving, follow the manual's power-off instructions and unplug the machine.

These models display a moving or chasing pattern while cooking and count down near the end of the cycle. You don't need to guess the cooking time or manually switch the machine to Warm during a normal completed rice cycle.

Sources: ARC-5104SB manual, ARC-5104SBC manual, and ARC-914SBD manual.

What about Flash Rice?

The ARC-914SBD includes a Flash Rice function.

Aroma explicitly limits that function to white rice. Its manual warns against using Flash Rice for brown rice or other grains.

If you're making brown rice in an ARC-914SBD, use Brown Rice, not Flash Rice.

Source: ARC-914SBD manual, printed page 10.

White rice and brown rice: why the instructions aren't interchangeable

It's tempting to assume brown rice simply means using the white-rice instructions with extra water.

That isn't a safe assumption across Aroma's lineup.

Look at these three examples:

  • ARC-614BP: Brown rice has its own measured-water table. Two supplied cups of brown rice call for three supplied cups of water.
  • ARC-5104SBC: The manual uses the matching pot line for both white and brown rice, but the machine has separate White Rice and Brown Rice programs.
  • ARC-753SG: Aroma's currently linked cooking guide permits three supplied cups of white rice but specifies just one supplied cup for brown rice.

Each example comes from a manufacturer document. They are not interchangeable instructions.

If you're making jasmine, basmati, sushi rice, quinoa, or another grain and your model's manual doesn't give an exact chart, don't assume a ratio from a different Aroma product will work. Start with the instructions for that grain and the functions supported by your exact cooker.

Aroma's own water FAQ advises beginning with the model's chart and adjusting for the particular rice you're using.

Source: Aroma: How Much Water Should I Use?.

Why did my rice come out wet, dry, or undercooked?

Before changing how much water you use, make sure you used the right measuring cup, the right model's instructions, and the correct rice program.

On a small screen, swipe the table sideways.

What happenedWhat to checkWhat Aroma recommends
Rice is dry or firmDid you use less water than the model's chart requires? Did you substitute a full U.S. cup of dry rice without adjusting the measurement?Follow the correct model-specific measurements. For future batches, Aroma's general FAQ suggests increasing water in small increments of ¼ cup at a time.
Rice is mushy or too wetWas too much water added? Did you use a separately measured amount when the manual calls for numbered pot lines?Reduce water slightly in a future batch. Some digital manuals also provide instructions for stirring and using Keep Warm to release excess moisture.
Rice or starchy water boils overWas the rice rinsed? Did the batch exceed the allowed quantity?Rinse thoroughly, use the specified rice and water measurements, and respect the model's capacity.
Rice is unevenly cookedWere the rice and water measured correctly? Was the correct program selected?Check the manual's chart first. Aroma identifies incorrect measurements and excess starch as common causes of uneven cooking.
Bottom layer is lightly brownedIs it a basic one-switch cooker?Aroma says some browning can occur on analog cookers. Proper rinsing may help reduce it.

Manufacturer references:

If starchy water keeps escaping after you have checked rinsing, measurements and batch size, our rice-cooker boil-over guide covers the next checks. Follow the instructions for your exact model.

Can you fix dry rice that's already cooked?

It depends on the cooker.

For example, the ARC-5104SBC manual specifically provides a procedure for dry or chewy rice: add water, stir, close the lid, and run its White Rice function again.

That is a documented procedure for this model. It is not permission to restart every rice cooker in the same way.

Check the troubleshooting section of your exact manual before attempting another cycle.

Source: ARC-5104SBC manual, troubleshooting section.

What if the cooker shows an error code?

Don't treat an error message as a water-ratio problem.

For example, the ARC-5104SBC manual directs owners to contact Aroma Customer Service for E1 or E2, which the manufacturer identifies as sensor-related errors.

Use your model's error-code chart rather than trying to repair electrical components yourself.

Can't find your Aroma model in this guide?

Aroma makes more rice cookers than the five covered here. The right instructions may be different, even when the machines look similar.

Here's how to get the correct document:

  1. Unplug the cooker and allow it to cool.
  2. Find the silver identification sticker, usually on the back or bottom.
  3. Write down the complete model number, including letters after the numbers.
  4. Note the manufacture code if the booklet or online instructions seem inconsistent.
  5. Visit Aroma's official Parts & Manuals page.
  6. Search for the exact model.
  7. If it doesn't appear, Aroma recommends trying a shorter portion of the model number.

The manufacturer's manual-finding instructions explain the search process.

If two official documents give different instructions for what appears to be your model, contact Aroma with the model and manufacture code. Don't guess which capacity or water chart applies.

One last check before pressing Cook

If your rice is still dry and uncooked, check these four things:

  • Your model number matches the instructions you're following.
  • You measured rice with an Aroma-sized cup, not an unadjusted standard U.S. cup.
  • You added water by the method specified for that rice type and model.
  • You selected the right function, or pushed the Cook switch on a mechanical model.

That should get you past the most common measuring and control confusion without buying anything.

If you're also trying to understand why the box says "six cups" when the cooker holds much less dry rice, our rice-cooker sizing guide explains the difference between cooked and uncooked capacities.

Sources & research notes

Sources checked November 19, 2026.

  1. Aroma: Model Number and Manufacture Code (opens in new tab)
  2. Aroma: What the Included Measuring Cup Really Measures (opens in new tab)
  3. Aroma: How to Measure Rice and Water Correctly (opens in new tab)
  4. Aroma: How Much Water Should I Use? (opens in new tab)
  5. Aroma: How to Properly Rinse Rice (opens in new tab)
  6. Aroma: Overboiling, Burning, and Undercooking (opens in new tab)
  7. Aroma: Bottom Layer Browning (opens in new tab)
  8. Aroma: Find Manuals and Replacement Parts (opens in new tab)
  9. ARC-753SG current quick-start manual, 2026 (opens in new tab)
  10. ARC-753SG linked cooking guide (opens in new tab)
  11. ARC-614BP instruction manual (opens in new tab)
  12. ARC-5104SB instruction manual, 2023 edition (opens in new tab)
  13. ARC-5104SBC instruction manual, 2025 edition (opens in new tab)
  14. ARC-914SBD instruction manual, 2025 edition (opens in new tab)
  15. ARC-753SG parts and manuals, with the current quick-start and cooking guides (opens in new tab)
  16. Aroma Parts & Manuals directory (opens in new tab)
Back to top ↑